The EnergyTech 301 unit is a new low cost dust monitor using well-proven technology providing accurate and rapid results.
Being adaptable it can be used on duct sizes from 250mm to 5m making the EnergyTech 301 a suitable sensor for a wide range of applications where a dust measurement is required.
- Direct sensing method; actual particulate concentration
- Automated online zero and span checking facility
- Integrated calibration function for mg/m3 output
- Proven sample port design with minimal maintenance requirements
- Adaptable, making it suitable for virtually all dust collectors
- Rugged & robust design developed for easy installation and maintenance
EnergyTech 301 continuous dust monitor uses the well-proven tribo-electric sensor technology to directly measure mass particulate concentration by sensing the frictional charge created when particles collide with a conductor.
The advanced electronics of the EnergyTech 301 detect this signal and present it to the operator via RS485 or 4-20mA directly out from the sensor head. The EnergyTech 201 also features a built in display for viewing live sensor data as well as for configuration and calibration.
The measurement levels can be corrected to mg/m3 via an integrated calibration function.
The tribo-electric technique is extremely sensitive, capable of detecting dust concentrations of less than 1mg/m3 in small ducts.
The EnergyTech 301 requires no critical alignment and has no optical surfaces to keep clean. The sensor is easy to install, requiring only a simple probe and is ideal for small duct sizes.
Minimal maintenance is required, infrequent probe cleaning and low installation costs make this technology extremely attractive for dust collector monitoring.
Technical Specification
Sensor Unit
Operating Principle Tribo Electric
Operating Range 0.07 to 6500mg/m3 or 0 - 100%
Particle Size 0.1 to 100μm
Gain 0.5 to 1000
Resolution 0.01%
Response Time 1sec to 1hr (operator selectable)
Alarm Level Programmable by user
Probe Lengths 250, 500, 750 & 1000mm
Flue Gas Temperature 0°C to +200°C
Ambient Temperature -20°C to +55°C
Power Supply 85-265V AC (24V version available)
Construction aluminium casting, weatherproof to IP67 (NEMA 4)
Dimensions (mm) H160 x W160 x D90
Mounting Arrangment Supplied 1” BSP, 100mm Long Stub Pipe
Compliances
EMC 89/336/EEC directive compliant
Low Voltage 73/23/EEC directive compliant)
Customer Interface
Analogue Outputs 4-20mA opto-isolated
Alarm Outputs alarm relay 2.5A @ 24V
Digital Outputs RS485 Modbus Bi-Directional
Display 32 Character alpha-numeric back-lit LCD)
Keypad 4-key soft-touch entry
Compliances
Power 85-265V AC (24V version available)
To find out more, call McCarthy Environmental on 01604 635333 and ask for Andy or email [email protected]
https://mccarthy-environmental.co.uk/introducing-codel-international-ltds-energytech-301/